View Full Version : 414 Feedback Observations/Bug reports
stugumby
04-04-2019, 02:59 PM
Just finished downloading and installing on 2nd pc, noticed the following
1. large vertical visual distortion bar on MBR forward cockpit view. see attached
2 IL-4 bomb bug, using mixed 2x fab 250 and 1x fab 500 and 10x fab 100 the selection item is listed as 1 fab 100.
it's not a distortion
https://s8.hostingkartinok.com/uploads/images/2019/04/9d84c46833b2507e0d92b8f463efce31.jpg
stugumby
04-04-2019, 04:08 PM
So is it a sliding panel or flare port? Or plexiglass overlapping? Oh before I get too involved with exploring thank you for the patch! Always good to have stock updates! Seems everyone wants their game in different ways,hope it will be reasonably mod friendly.
TitusFlavius
04-04-2019, 04:31 PM
Only a small detail. The emergency HUD message on the He-177 is displayed incorrectly ("Forsazh!" instead of ("Erhöhte Notleistung EIN!") in the German localization.
See the screenshot.
https://www.bilder-upload.eu/thumb/40f7fe-1554395307.jpg (https://www.bilder-upload.eu/bild-40f7fe-1554395307.jpg.html)
Treetop64
04-04-2019, 07:48 PM
So is it a sliding panel or flare port? Or plexiglass overlapping? Oh before I get too involved with exploring thank you for the patch! Always good to have stock updates! Seems everyone wants their game in different ways,hope it will be reasonably mod friendly.
Yeah, just a sliding glass windscreen. Pretty similar to that on the DC-3.
Not sure you can open it in the sim, but there you go.
Anywho, I posted this in the 4.14 thread but it's more appropriate here: When using the mouse wheel as the throttle the sensitivity is very low. Takes multiple turns just to make small changes in throttle setting. In previous versions of the sim the sensitivity was much more and worked well.
Not that much of an issue when flying level bombers, but it becomes a problem when flying fighters, as I look around with the mouse and use the mouse wheel to apply throttle as needed.
I don't know if there's anyway to adjust the throttle sensitivity (the three control axis you can). Just wanted to post this here.
Thanks again for the continuing support of this fantastic product!
stugumby
04-05-2019, 04:06 PM
made a test mission to learn how to use gunpods and discovered the AI will not engage even if linked to a seperate target. As for single player equiped with pods i discovered that if using the 81A pods with angled down guns once your looking thru the gun sight you cant look around. Also i cant kill parked planes at all, ,was able to destroy motorcycles and trucks etc.
[MAIN]
MAP BlackSea/load.ini
TIME 12.0
CloudType 0
CloudHeight 1000.0
player g0100
army 2
playerNum 1
[SEASON]
Year 1941
Month 8
Day 15
[WEATHER]
WindDirection 0.0
WindSpeed 0.0
Gust 0
Turbulence 0
[MDS]
MDS_Radar_SetRadarToAdvanceMode 0
MDS_Radar_RefreshInterval 0
MDS_Radar_DisableVectoring 0
MDS_Radar_EnableTowerCommunications 1
MDS_Radar_ShipsAsRadar 0
MDS_Radar_ShipRadar_MaxRange 100
MDS_Radar_ShipRadar_MinHeight 100
MDS_Radar_ShipRadar_MaxHeight 5000
MDS_Radar_ShipSmallRadar_MaxRange 25
MDS_Radar_ShipSmallRadar_MinHeight 0
MDS_Radar_ShipSmallRadar_MaxHeight 2000
MDS_Radar_ScoutsAsRadar 0
MDS_Radar_ScoutRadar_MaxRange 2
MDS_Radar_ScoutRadar_DeltaHeight 1500
MDS_Radar_HideUnpopulatedAirstripsFromMinimap 0
MDS_Radar_ScoutGroundObjects_Alpha 5
MDS_Radar_ScoutCompleteRecon 0
MDS_Misc_DisableAIRadioChatter 0
MDS_Misc_DespawnAIPlanesAfterLanding 1
MDS_Misc_HidePlayersCountOnHomeBase 0
MDS_Misc_BombsCat1_CratersVisibilityMultiplier 1.0
MDS_Misc_BombsCat2_CratersVisibilityMultiplier 1.0
MDS_Misc_BombsCat3_CratersVisibilityMultiplier 1.0
[RespawnTime]
Bigship 1800
Ship 1800
Aeroanchored 1800
Artillery 1800
Searchlight 1800
[Wing]
g0100
[g0100]
Planes 2
Skill 1
Class air.JU_88A4
Fuel 60
weapons 2xWB81A
[g0100_Way]
NORMFLY 275063.10 146951.06 800.00 300.00 &0
GATTACK 266935.07 147798.38 500.00 300.00 &0
NORMFLY 261066.24 148679.64 500.00 300.00 &0
NORMFLY 284913.54 149260.53 500.00 300.00 &0
[Chiefs]
0_Chief Vehicles.MotSch_Kp 1
[0_Chief_Road]
267127.00 147696.36 120.00 0 8 3.055555582046509
266900.00 147700.00 20.00
261300.00 147700.00 20.00
261100.00 147700.00 120.00
260900.00 147700.00 20.00
256900.00 147700.00 20.00
256300.00 148300.00 20.00
256008.41 148443.03 120.00
[NStationary]
0_Static vehicles.planes.Plane$IL_4_DB3F 1 266924.45 147738.80 539.10 0.0 null 1 1.0 null 1
1_Static vehicles.planes.Plane$IL_4_DB3F 1 266926.12 147770.04 539.10 0.0 null 1 1.0 null 1
2_Static vehicles.planes.Plane$IL_4_DB3F 1 266887.52 147766.64 539.10 0.0 null 1 1.0 null 1
3_Static vehicles.planes.Plane$IL_4_DB3F 1 266889.72 147737.88 539.10 0.0 null 1 1.0 null 1
4_Static vehicles.planes.Plane$IL_4_DB3F 1 266863.89 147750.28 539.10 0.0 null 1 1.0 null 1
5_Static vehicles.stationary.Stationary$Wagon9 1 266997.80 147738.46 449.10 0.0
6_Static vehicles.stationary.Stationary$ZIS5_PC 1 266983.63 147760.39 449.10 0.0
7_Static vehicles.stationary.Stationary$ZIS5_PC 1 267000.80 147762.10 449.10 0.0
8_Static vehicles.stationary.Stationary$ZIS5_PC 1 267029.14 147756.94 449.10 0.0
9_Static vehicles.stationary.Stationary$ZIS5_PC 1 267028.29 147738.04 449.10 0.0
10_Static vehicles.stationary.Stationary$ZIS5_PC 1 267017.13 147727.72 449.10 0.0
11_Static vehicles.stationary.Stationary$ZIS5_PC 1 266955.73 147722.18 449.10 0.0
12_Static vehicles.stationary.Stationary$ZIS5_PC 1 266972.90 147742.36 449.10 0.0
13_Static vehicles.stationary.Stationary$ZIS5_PC 1 266984.06 147745.35 449.10 0.0
14_Static vehicles.stationary.Stationary$ZIS5_PC 1 266980.20 147732.04 449.10 0.0
15_Static vehicles.stationary.Stationary$ZIS5_PC 1 267015.40 147747.92 449.10 0.0
[Buildings]
[Target]
1 0 0 0 500 266906 147732 500
[StaticCamera]
266941 147753 100 0
[Bridge]
[House]
shelby
04-05-2019, 06:26 PM
Yes AI ju88 with the gunpods does not attack ground targets and i am waiting a code for it. For now use it as a heavy fighter
Tolwyn
04-05-2019, 07:59 PM
MBR Front gunner slow to respond to activate (as a human gunner).
Also, new change on not being able to fire gun when parts of the aircraft are in the way... uh... this is a human decision, ?
Game deleted JSGME mod activator without permission.
Not impressed with this new method of patch distribution.
shelby
04-05-2019, 08:12 PM
I can't use the dgen 4.0.8 but ok i am waiting the new dgen by Asura
stugumby
04-06-2019, 09:32 AM
Screenshots folder disappeared...
baball
04-06-2019, 04:13 PM
Also, new change on not being able to fire gun when parts of the aircraft are in the way... uh... this is a human decision, ?
If you are talking about the He-177, the guns cutting when your sight is crossing the tail is normal. The He-177's turrets had disconnectors to prevent shooting accidents.
TitusFlavius
04-06-2019, 05:48 PM
Screenshots folder disappeared...
Moin,
can't confirm. By me screenshotfolder is present and screenshots will be saved in this folder.
Avimimus
04-07-2019, 03:34 AM
Now forgive me if I'm wrong - but I was under the distinct impression that the ABKP-100 would stay attached upon releasing the bombs (much like the KMGU)?
The dispersion also seems a bit high (given the lack of rotation or gas based dispersion for the bomblets).
Nice to see the love for the U-2 though!
Marabekm
04-07-2019, 01:00 PM
Not sure if its the new patch or just a user error :rolleyes: .
If I try and launch a game on hyperlobby, it just starts the game up like normal, and doesn't go into the multiplayer mode automatically. So now the only way others can join my coops is through IP.
Also a friend asked me to pass this along that he couldn't update the steam version of game. Apparently the Steam auto updater is overwriting all of the 4.14 files.
stugumby
04-07-2019, 11:43 PM
1. Plane date will make a difference in cockpit instruments. before 1942 you will not have beacon direction finder gage. After jan 1942 you will have it.
2. MBR appears to be coded as a level bomber, AI will ignore moving target if equipped with rockets and bombs and not linked to attack.
3. AI will land on stationary test runway 5 in a glide with engine off.
4. Compass is out of alignment with binnacle compass
5. Fuel mix has to be changed at 900-1000m.
6. If a wing float is shot off you still get its wake on landing.
Ju88 with gunpods:
1. neither pod will kill a stationary aircraft. They will kill trucks etc.
2. pods are not jettisonable
3. Pods arent very heavy, since they go on bomb hardpoints why isnt there a bomb bay load out available such as sc 50/sc 70 carried in bomb bay. makes sense to squirt and bomb at same time.
shelby
04-07-2019, 11:49 PM
For the ai mbr2 use this http://forum.aviaskins.com/showpost.php?p=192298&postcount=14. Put it to the mods folder
stugumby
04-08-2019, 12:49 AM
Maybe its just me but taking a seaplane off from a rough beach while consuming Jim Beam Red Stag can lead to this...
gaunt1
04-08-2019, 08:50 AM
Well, not strictly a bug, but on the He-177, the lower gunner positions are a bit hard to use because the glass is too "dirty" or too much glare.
baball
04-08-2019, 08:58 AM
Maybe its just me but taking a seaplane off from a rough beach while consuming Jim Beam Red Stag can lead to this...
Yeah, the MBR-2 has a very strong tendency to pitch down because of the engine being mounted over the wings. It was even worse during beta to the point I could do front flips.
shelby
04-08-2019, 09:22 AM
front or rear?Both
Bobo123
04-08-2019, 06:43 PM
I don't see any mirrors at the He 177.
Torsteven
04-08-2019, 11:04 PM
Ju88 with gunpods:
1. neither pod will kill a stationary aircraft. They will kill trucks etc.
A little tricky but it's possible ! ;)
https://i.postimg.cc/ZRd4YnRx/grab0010.jpg
JacksonsGhost
04-09-2019, 02:45 PM
Not a new problem, but the U-2VS still crashes often when flown by the AI in multi-aircraft flights, on the Moscow 1 map at least (see the TB-3 single mission for example). The lead aircraft in each flight is fine, but after a while the others fall out of formation and crash. It looks like the pilots just fall asleep.
After seeing that this situation is still the same in 4.14 I have done more testing myself in various missions. I did a lot of experimenting with speed, skill, formation, time of day, season etc. Changing the map to Moscow 2 (no snow/skis) seems to fix things in the TB-3 mission, but in others even that doesn’t help. Sometimes reducing the bomb load seems to help too.
So I guess the U-2VS is generally limited to single-aircraft flights when flying with skis and certain loads, on the Moscow 1 map at least.
Does anyone know why it is that the lead aircraft are always fine while the followers crash even when they are all set to the same skill level?
shelby
04-09-2019, 02:48 PM
Yes it need fix. Did you change it as a level bomber to see the behavior?
stugumby
04-09-2019, 02:54 PM
I've built lots of U2 missions and make all of them with the player as the wingman, seems to help with the crashes.most stable speed is 100kph at 800m, fuel 70%. Also don't link gatk icon to target,as U2 seems to be coded as level bomber.
R-5 handles better now but still takes forever to climb out, for fmb purposes it's better to air start 200m higher than rest of waypoints.
baball
04-09-2019, 04:24 PM
R-5 handles better now but still takes forever to climb out, for fmb purposes it's better to air start 200m higher than rest of waypoints.
This plane indeed had a big problem with its lift when it was introduced in the game. In fact it could only climb up to 5200m instead of 6200m, and that was after flying for two hours with a full tank of fuel. I had made tests during the beta after corrections, and it could climb to 300 m in less than 30s after takeoff as indicated in the original R-5 manual, so i would say that it is quite close to reality now.
Tolwyn
04-09-2019, 04:30 PM
I stand corrected, then!
If you are talking about the He-177, the guns cutting when your sight is crossing the tail is normal. The He-177's turrets had disconnectors to prevent shooting accidents.
JacksonsGhost
04-09-2019, 05:09 PM
Yes it need fix. Did you change it as a level bomber to see the behavior?
Ah ... my apologies ... deleting the target selections seems to be the answer to fixing the crashes in the TB-3 mission. So the problem is not as bad as I thought. It looks like the worst of it can be avoided with a bit of mission fixing.
It does still seem to have a few too many crashes in other missions where there is no target selection, but I haven't really had a good look at that.
Music
04-10-2019, 01:49 PM
Flew a few missions online, my natural environment, and the planes are very stable now, they do not jump when lining up a shot with micro movements of the sticks.
Roads seem to be stitched differently, you can see the individual pieces.
Pribaltika, which was always a dark map, (no sun) is now proper for 12:00.
Looks like the bullets striking the ground has been upgraded, you can see the power of the missed shells. Subtle, but instantly noticeable.
Raised some AAA guns, are you guys going to add that function to objects, I would like to raise some sand bags to put around the raised guns. Also. it seems like if a gun is on a hill, when you move it, it stays at that level, you need to drop it if where you are putting it is lower.
And when you Insert a object, cloning the one you have selected, it stays on the original, the new one has to be clicked on to rotate, raise, or move.
and we seem to have lost the 7 and 9 keys (the smallest increments of movement) for rotating objects, neither of them will work on my machine.
It's hard to say if it's better, but it sure seems that way.
Cheers.
stugumby
04-10-2019, 02:03 PM
7 and 9 keys have to be reset in the fmb configure section, same with insert etc.
-)-MAILMAN-
04-10-2019, 03:29 PM
The speed indicators for the below listed planes got changed in this patch to indicate MPH instead of KNOTS. This is incorrect for USN/USMC aircraft. The speed indicator should be in KNOTS. You can verify this by comparing it to the speed bar.
F4F-3
F4F-4
FM-2
Corsair I (F4U-1)
Corsair II
Corsair IV
F4U-1A
F4U-1C
F4U-1D
baball
04-10-2019, 03:39 PM
The speed indicators for the below listed planes got changed in this patch to indicate MPH instead of KNOTS. This is incorrect for USN/USMC aircraft. The speed indicator should be in KNOTS. You can verify this by comparing it to the speed bar.
F4F-3
F4F-4
FM-2
Corsair I (F4U-1)
Corsair II
Corsair IV
F4U-1A
F4U-1C
F4U-1D
As I said in the release thread, this is indeed a mistake that should have been corrected in this patch. I assumed it was fixed in beta4, but I must admit that I didn't test it afterwards, sorry. Anyway, it has been reported and it will, I hope, be corrected in the hotfix.
-)-MAILMAN-
04-10-2019, 04:10 PM
I was just making sure it got reported in the proper thread since I didn't initially see one for feedback and bug reports:
414 Feedback Observations/Bug reports
I also corrected my post in the 4.14m release that the F6F-3 Late and F6F-5 speed indicators were in fact indicating correctly in KNOTS.
shelby
04-10-2019, 04:29 PM
Here is a screnshot from the FM2 manual
https://i.postimg.cc/ncRktwxY/Screenshot-7.jpg
dimlee
04-10-2019, 05:42 PM
I am not able to join neither of working 4.14 servers from this list:
http://il2.com.ru/en/links.php?sort=version
When I try to connect directly from the game menu, I get "Connection is successful!" first and then the error message "The communication with the remote host is lost. Reason: Timeout 0".
I have joined all those servers in 4.13 earlier without any issue.
I153 was kind enough to suggest the "cheating" from my side. So nice.
http://www.mission4today.com/index.php?name=ForumsPro&file=viewtopic&t=20876
But I have installed 4.14 on the copy of "vanilla" 4.13.4 which had never any mods or additional programs installed. Ever. The only changes were done in conf.ini (graphics and network) and in Samples folder (new voices added). And new skins, of course.
Even more, I have no idea about any "cheating" add ons and never was interested in them.
So, how to overcome this connection issue?
Any advise is appreciated. Thanks beforehand.
Music
04-11-2019, 01:11 AM
does it get as far a CRT:2 message, I noticed that when I joined, never saw that before.
I had no problem with the AleXserver, the two other servers that have updated to 4.14 have never let me join so I don't bother.
idefix44
04-11-2019, 11:51 AM
@dimlee,
Have you try with il2fb.exe 512 MB?
Feathered_IV
04-11-2019, 11:56 AM
I don't seem to be able to load a map in FMB, zoom in and press Enter, then hold down the RMB and move the mouse pointer along the ground anymore. :confused:
stovak
04-11-2019, 01:02 PM
I don't seem to be able to load a map in FMB, zoom in and press Enter, then hold down the RMB and move the mouse pointer along the ground anymore. :confused:
There have been some changes to the key mapping.
In FMB if you go to Configure/Control Keys on the menu and Reset to defaults, then you can move the pointer by holding F4 and using the RMB. I had to manually change a few keys to get back to the way I like it.
dimlee
04-11-2019, 02:37 PM
@dimlee,
Have you try with il2fb.exe 512 MB?
I did not. Is it the option available during the installation? I didn't notice it.
dimlee
04-11-2019, 02:44 PM
does it get as far a CRT:2 message, I noticed that when I joined, never saw that before.
I had no problem with the AleXserver, the two other servers that have updated to 4.14 have never let me join so I don't bother.
Two other servers probably want you to input the password. It should be explained somewhere on their site: http://il2.com.ru/en/links.php
shelby
04-11-2019, 02:48 PM
I did not. Is it the option available during the installation? I didn't notice it.from readme
The update includes additional standardized files il2fb.exe. They are located in the "EXE" subfolder of the games root directory. The files differ in the parameters of the use of RAM by the Java gaming machine, support for console mode, and support for mods. For versions of the il2fb.exe files that support mods, the file includes a wrapper.dll file. If any non-standard executable files are detected in the root folder of the game, the game will not start. Mods are supported by the generally accepted way of reading the content of the "MODS" subfolder. The mods themselves must be compatible and adapted to version 4.14 of the patch. The only limitation when using versions of il2fb.exe files with mods support is that when connecting in a network game to a dedicated server (Dedicated Server) the host and client versions must be identical.
dimlee
04-11-2019, 03:02 PM
from readme
The update includes additional standardized files il2fb.exe. They are located in the "EXE" subfolder of the games root directory. The files differ in the parameters of the use of RAM by the Java gaming machine, support for console mode, and support for mods. For versions of the il2fb.exe files that support mods, the file includes a wrapper.dll file. If any non-standard executable files are detected in the root folder of the game, the game will not start. Mods are supported by the generally accepted way of reading the content of the "MODS" subfolder. The mods themselves must be compatible and adapted to version 4.14 of the patch. The only limitation when using versions of il2fb.exe files with mods support is that when connecting in a network game to a dedicated server (Dedicated Server) the host and client versions must be identical.
Thanks for the hint. I did not care about this EXE subfolder since my 4.13.4 has never been modded. But I tried anyway all il2fb.exe files in Client_MODS and Client_RU. They don't start. No idea what does that mean for me...
stugumby
04-11-2019, 08:58 PM
Try this,copy what worked and put in a folder outside root directory then select 512 from exe folder and paste it over current exe. Send the new one to desktop as short cut exit out and try it out.
dimlee
04-12-2019, 05:10 PM
Try this,copy what worked and put in a folder outside root directory then select 512 from exe folder and paste it over current exe. Send the new one to desktop as short cut exit out and try it out.
Thank you for your advise.
512 exe works fine to start the game offline. But it does not help in connecting to the servers. Same error message.
I'll probably make separate clean instal from Platinum DVD plus all subsequent updates and see what happens.
Or not to waste time and just wait for 4.14.1... Who knows what kind of new "surprises" new version will bring.
stugumby
04-12-2019, 05:45 PM
I was in a mission and noticed when i was shooting i didnt need to change drums anymore. can some one else test to confirm?
stugumby
04-12-2019, 05:47 PM
Did the server you were trying to join use the exact same exe as you? That is mentioned in the read me as well.
stovak
04-12-2019, 06:18 PM
stugumby-
tested in 4.14 and 4.13.4
- the R5 does not change drums in either version.
- the U2-VS stops to change drums in both versions.
dimlee
04-13-2019, 12:15 PM
Did the server you were trying to join use the exact same exe as you? That is mentioned in the read me as well.
I have no idea. Actually, I tried all that are mentioned as 4.14 here:
http://il2.com.ru/en/links.php?sort=version
When I have time, I'll try another clean and separate 4.14. install. We will see.
Music
04-13-2019, 06:02 PM
Well Dimlee, if you make it onto the AleXserver, say hello. It's pretty busy around 12:00 noon here in +5GMT. Usually 20 players, some times many more.
stugumby
04-13-2019, 11:51 PM
MBR decided to go as low as possible and made a U-2 style charge at a flak ship. didnt end well.
JacksonsGhost
04-14-2019, 12:38 PM
I've been enjoying re-flying old missions with the new atmospherics and literally seeing them in a new light (for better or worse) :)
I was hoping to see the U-2VS mission U2-05_19420501 titled "1942 - Supply to Encircled Cavalry Corps" updated with a new Timeout setting so that the mission became achievable.
Some may remember I posted a simple fix for this about 6 months ago and Sita thanked me for the tip. I thought that might mean it would be fixed with the new patch since it only requires a single digit to be changed in the .mis file to be fixed, but no such luck. So anyone trying to fly that mission will still get a mission failure message after 30 minutes, long before reaching the target.
I'll repeat the fix for those wanting to know. Just change the Target line in the .mis file as below (key digit in red):
(Original) 3 0 1 30 500 19909 36097 450
(New Fixed) 3 0 1 90 500 19909 36097 450.
This works equally well for 4.13.4m and 4.14m.
shelby
04-14-2019, 12:46 PM
i hope this fix with some others mission fixes will be include in the hotfix
dimlee
04-14-2019, 07:33 PM
I have made another separate and "clean" install of 4.14 starting from DVD Platinum then upgrading with SAS Megapatch to 4.12.2 and then adding all updates up to 4.13.4.
Then installed 4.14.
Still no luck with multiplay. Neither of 4.14 servers from the list below allow me in.
http://il2.com.ru/en/links.php?sort=version
Same problem as before. First message is "Connection is successful!" and then ""The communication with the remote host is lost."
So, it seems that I'm banned from multiplay by some new tricks implemented by TD in 4.14.
Not nice. Not smart. Not user friendly.
P.S. No problem with connecting to 4.13 servers and earlier... Ever.
on which server you try to connect?
for now i only can propose two way to check whats wrong ... if you have GOG or steam version of 1946 instal over it 4.14 or instal patch over patch from platina ... it's not comfortable but as i see it's best way find missed link or some extra files ... (check pm)
yes ... on 4.13.xx you can connect to any sevrevs .. i suppose even with CRT-2 ...
stugumby
04-15-2019, 12:20 AM
TB-3 now has OPB-1 but for some reason it no longer follows rudder trim instructions when stabilizer is applied. take it off stabilizer and rudder can be shifted. It has the lights for pdi left right but as bombardier if in stabilized mode they dont do anything. neither does rudder trim..I remember in one of the 413 series patches that soviet planes didnt have level stabilizer but they still responded to the command and rudder trim to slightly change course.
Music
04-15-2019, 04:30 AM
I know it's the longer install, but try and do every patch from 408m individually, I had zero problems and that is the way I did it.
As far a game play, have you done something to the maps, they seem to be more hilly, And more defined when at alt. It looks great. Planes handle well, and I see there are some new skins for early 109's, the dark Western Europe Skins.
Lots of work went into this latests patch, I'm sure I will find other surprises and features not mentioned in the "read me".
Cheers!!
dimlee
04-15-2019, 10:36 AM
on which server you try to connect?
for now i only can propose two way to check whats wrong ... if you have GOG or steam version of 1946 instal over it 4.14 or instal patch over patch from platina ... it's not comfortable but as i see it's best way find missed link or some extra files ... (check pm)
yes ... on 4.13.xx you can connect to any sevrevs .. i suppose even with CRT-2 ...
All 4.14 servers from the link I posted above. Just to repeat it:
http://il2.com.ru/en/links.php
I see the point of your suggestion. I'll try this again when I have free weekend.
However, that does not explain what exactly TD did to prevent users (not cheaters - please) to join 4.14 servers? As I mentioned, there are no "mods" in either of my two installations. Does 4.14 conflict with some programs on PC outside of 4.14 folder ? What are they?
I recall the scandal with one of early Il-2 versions when innocent programs like virus checkers were recognised as "cheats". Something like that again?
shelby
04-17-2019, 12:17 PM
does the buffalo's I airspeed indicator show the speed in knots?
https://www.warbirdforum.com/buffpilotmanual.pdf
dflion
04-20-2019, 01:02 AM
I'm creating a mission using the He-177-A3 bombers on the 'Moscow Map'. When I hit the play button I get the following message:-
'Mission Loading Failed: Mesh 3do/humans/Paratroopers/Russia/mo no.sim not created.'
Can anybody help me?
DFLion
sounds familar ... at current moment can't remeber the cure for it.
stugumby
04-21-2019, 12:27 AM
Have you tried using the 512 exe?
JacksonsGhost
04-21-2019, 11:32 AM
I'm creating a mission using the He-177-A3 bombers on the 'Moscow Map'. When I hit the play button I get the following message:-
'Mission Loading Failed: Mesh 3do/humans/Paratroopers/Russia/mo no.sim not created.'
Can anybody help me?
DFLion
Are you running in Direct X? If so, running in Open GL may help.
dflion
04-22-2019, 09:04 AM
Thanks everybody. I am running Direct X 12 Jackson Ghost, so I don't think I can run in Open GL.
Stugumby - not sure what you mean by 'try using 512 exe'
Sita - obviously there must be a cure for it somewhere? In this upgrade 4.14 I can't use any Moscow map. I have also seen this same message when I try to run some of my older campaigns?? I have a feeling there is something missing on these Moscow maps i.e 3do/humans/Paratroopers/Russia and the game is blocking the start - this might be effecting a lot of players!!!
Thanks again - if anybody has an idea (especially the Daidalos Team), let me know. I have started a campaign with the He-177-A3 operating with KG1 which is coming along very well. KG1 bombed the railway centre at Velikye Luki, 300 miles to the west of Moscow, using 87 He177's flying at 20,000ft - would have made an impressive sight!
DFLion
JacksonsGhost
04-22-2019, 12:51 PM
Thanks everybody. I am running Direct X 12 Jackson Ghost, so I don't think I can run in Open GL.
I suppose it could be a Daidalos issue, but in the past that error has indicated a graphics/memory limitation to do with textures. OpenGL often works better with textures (including enabling Perfect textures with the right config.ini settings) if your graphics card supports it. I also have DirectX 12 but run IL-2 through OpenGL by selecting it in the in-game graphics options.
In any case here's a link to one of many threads about the Paratrooper issue (Storebror's comment gives some tech explanation of the texture issue):
https://www.sas1946.com/main/index.php?topic=17194.0
Ventura
04-22-2019, 02:52 PM
I noticed using an old mission with version of AI He-177-A3 and enabling one AI group as player flyable He-177-A3 will not let you go beyond briefing/plane setup. You get plane not loading or something. Resolved by creating new flight for player flyable.
Thank you TD for all your work past and present on a most enjoyable and historically immersive sim!
Ice_Eagle
04-22-2019, 09:59 PM
I'm creating a mission using the He-177-A3 bombers on the 'Moscow Map'. When I hit the play button I get the following message:-
'Mission Loading Failed: Mesh 3do/humans/Paratroopers/Russia/mo no.sim not created.'
Can anybody help me?
DFLion
In your conf.ini in the root folder try this under [Render_DirectX] or [Render_OpenGL] whichever your using.
TexCompress=2
TexFlags.TexCompressARBExt=1
stugumby
04-22-2019, 10:59 PM
MBR is coded as a level bomber, if linked to a moving ship it will go to low and eventually ram the ship like a torpedo. best to use unlinked and it will bobble about a bit and hopefully stay high enough to not self destruct.
Music
04-26-2019, 04:37 PM
Just ran a mission with the he177 in it, and the plane ends up ditched at spawn, with no skin. Like the Jets1957 do if you don't have a certain mod.
http://www.mediafire.com/file/jjx6vae07djxq2r/Lvov.properties/file
http://www.mediafire.com/file/e54n7nudz5rysqh/Lvov.mis/file
pure vanilla game.
*this should be played in the Online dogfight section of the game.
I see below that the paratroopers is a issue, there are five flights of ju52's in this mission. Maybe that is the problem. serendipity at works here.
dflion
04-27-2019, 02:16 AM
I suppose it could be a Daidalos issue, but in the past that error has indicated a graphics/memory limitation to do with textures. OpenGL often works better with textures (including enabling Perfect textures with the right config.ini settings) if your graphics card supports it. I also have DirectX 12 but run IL-2 through OpenGL by selecting it in the in-game graphics options.
In any case here's a link to one of many threads about the Paratrooper issue (Storebror's comment gives some tech explanation of the texture issue):
https://www.sas1946.com/main/index.php?topic=17194.0
My graphics card supports OpenGL and thanks for your tip - the Moscow Map is now working. The only problem I have now is that all the rivers have turned black?? (on every Map) - see jpeg attached.
DFLion
stovak
04-27-2019, 02:47 AM
The only problem I have now is that all the rivers have turned black?? (on every Map) - see jpeg attached.
DFLion
Check your conf.ini under [Render_OpenGL]
These three NV settings should be set to =1
If they are =0 you get black rivers.
[Render_OpenGL]
TexFlags.TexEnvCombine4NV=1
TexFlags.DepthClampNV=1
TexFlags.TextureShaderNV=1
dflion
04-27-2019, 04:53 AM
Stovak, thanks for your help, that change fixed the problem
DFLion
stugumby
04-27-2019, 10:39 PM
It will shoot at a enemy plane but not an enemy boat of similar or larger size??
I placed a E boat between 2 offset D3 and about 500 yards ahead and they will not shoot mg at it, same for a tanker that they will torpedo,but no mg fire.
greybeard1
05-01-2019, 10:27 AM
Can't find the way to have it working.
Set UseAsuraDGen=1 in conf.ini
Put DGen.exe and DGen_mod.ini inside the folder #DGEN
tried with Asura's related MOD folder in and out the #DGEN folder, as well as putting all relevant files (.DB, .mis, planes.dat, etc) in and out the #DGEN folder (but with the campaignsRu6.dat there, the game can no more read it). No juice.
Asura's DGen_mod version is 2.0.1.2, which worked perfectly with previous 4.13.4.
Please help!
shelby
05-01-2019, 10:37 AM
Can't find the way to have it working.
Set UseAsuraDGen=1 in conf.ini
Put DGen.exe and DGen_mod.ini inside the folder #DGEN
tried with Asura's related MOD folder in and out the #DGEN folder, as well as putting all relevant files (.DB, .mis, planes.dat, etc) in and out the #DGEN folder (but with the campaignsRu6.dat there, the game can no more read it). No juice.
Asura's DGen_mod version is 2.0.1.2, which worked perfectly with previous 4.13.4.
Please help!
To work the dgen here is the steps
1. Create a #DGEN folder at the root of the game.
2. Dgen.exe new generator is renamed to DGenMOD.exe
3. Move DGenMOD.exe to the #DGEN folder
Now DGenMOD starts working with the key "UseAsuraDGen = 1"
greybeard1
05-01-2019, 11:02 AM
To work the dgen here is the steps
1. Create a #DGEN folder at the root of the game.
2. Dgen.exe new generator is renamed to DGenMOD.exe
3. Move DGenMOD.exe to the #DGEN folder
Now DGenMOD starts working with the key "UseAsuraDGen = 1"
Thank you so much for the prompt reply. Now the Asura's DGen is found and starts, but I get the error:
Can't open DGen_mod.ini
I tried to set the DGen_mod.ini both inside the #DGEN folder and inside the DGen game folder with no avail. Please, where should it be put?
Thanks again,
GB
shelby
05-01-2019, 11:04 AM
Can't open DGen_mod.ini
you do not move this file from the root folder
greybeard1
05-01-2019, 11:15 AM
you do not move this file from the root folder
Ah! Now I understand! Everything like before, except the DGen.exe renamed and put inside the #DGEN folder!
A big thanks shelby! I was really stuck!
Best regards,
GB
shelby
05-01-2019, 03:43 PM
TB-3 now has OPB-1 but for some reason it no longer follows rudder trim instructions when stabilizer is applied. take it off stabilizer and rudder can be shifted. It has the lights for pdi left right but as bombardier if in stabilized mode they dont do anything. neither does rudder trim..I remember in one of the 413 series patches that soviet planes didnt have level stabilizer but they still responded to the command and rudder trim to slightly change course.not a bug ... there was no trimmers on tb3... in 4.13.4 working sameway like in 4.14
greybeard1
05-02-2019, 06:42 AM
Sorry to disturb you again, but in an adverse site they claim that the update 4.14.1, if on the one hand allows you to launch the game even with "extraneous" executable files in its main directory (such as, for example, the JSGME.exe) , on the other hand it no longer allows the use of Asura's DGen mod. Since this last point is essential for me, I am refraining from practicing the update. Please, can you enlighten me about it?
Regards,
GB
shelby
05-02-2019, 07:19 AM
You can use the asuras dgen as you did before 4.14. If does not work use the 4.14 method. For now i am using the 4.0.8 dgen.
greybeard1
05-02-2019, 11:29 AM
You can use the asuras dgen as you did before 4.14. If does not work use the 4.14 method.
Thank you very much! :)
dimlee
06-11-2019, 06:53 PM
I have made another separate and "clean" install of 4.14 starting from DVD Platinum then upgrading with SAS Megapatch to 4.12.2 and then adding all updates up to 4.13.4.
Then installed 4.14.
Still no luck with multiplay. Neither of 4.14 servers from the list below allow me in.
http://il2.com.ru/en/links.php?sort=version
Same problem as before. First message is "Connection is successful!" and then ""The communication with the remote host is lost."
So, it seems that I'm banned from multiplay by some new tricks implemented by TD in 4.14.
Just to update.
4.14.1 was out and I tried again.
I used clean install using Platinum DVD and several methods of upgrading up to 4.13.4. Then from 4.13.4 to 4.14.1 with official tool.
No luck with multiplay.
Whatever server I try to connect to, I see either "time out" or "communication is lost" error message. Sometimes I see just for a split of second "Connection is successful" - before the error appears.
I have some suspicions...
During installation of 4.14.1 I was forced (again, as earlier with 4.14) to search and remove damned winPcap software. Now I managed to identify that winPcap was recently installed along with update of Avira Antivirus.
That makes me think that 4.14.1 is not friendly with some other Avira files. Who knows...
Anyway, final result is the same. No multiplay with 4.14.1 for me.
And we still do not know - and Daidalos Team does not tell us - what exactly causes this conflict, which software is "wrong" for 4.14.1 multiplay?
:confused:
Dusty88
06-17-2019, 10:11 AM
No luck with multiplay.
Anyway, final result is the same. No multiplay with 4.14.1 for me.
And we still do not know - and Daidalos Team does not tell us - what exactly causes this conflict, which software is "wrong" for 4.14.1 multiplay?
:confused:
I will put my "fun-4-all-414.1" server up for a couple of days with CRT=2 changed to CRT=0, see if you can get into it.
the IP is :
76.102.133.254:21088
At least you will be able to find out if CRT is kicking you or not in other servers if they have it on =2...
dimlee
06-17-2019, 07:30 PM
Dusty,
Thanks for your attempt to help.
I just tried to join this server and did not succeed.
Same story.
"Connection successful" which quickly disappears and then:
"The communication with the remote host is lost. Reason: Timeout 0".
Dimlee, you try use steam version? i offered gift to you steam version ... to check how it work with version without megapatch ... btw i find you in steam and make freind request ... but for now don't have answer ..
Dusty88
06-17-2019, 10:46 PM
Dusty,
Thanks for your attempt to help.
I just tried to join this server and did not succeed.
I don't know if this will help but....
The server is set to:CRT=0
In the "logs.lst" file is says you got kicked for:
"Cheater was detected! Reason=4: 'Radar' "
I have never seen that before, and CRT is off. Maybe Sita can tell you what that means?
Also, just for fun if you want to try it again, I will change these settings to 0 too.
checkServerTimeSpeed=1
checkServerClientSpeed=1
I will set those to = zero. It is odd that CRT seems to be working, even when it is turned off..
The IP is :
76.102.133.254:21088
dimlee
06-18-2019, 08:10 AM
Dimlee, you try use steam version? i offered gift to you steam version ... to check how it work with version without megapatch ... btw i find you in steam and make freind request ... but for now don't have answer ..
Sita, thanks for your kind offer. I have to log in to check.
Is there any difference between Steam version and Platinum DVD? I use the latter for clean installation.
it's not only kind offer ... i need to check it ...
as i read from your previouse post you using some kind megapatch ... i don't know what it is ... never used it .. don't know what sfs files versions included there ... before make a build of 4.14.xx we check all or almost all version of il2 what was published ... compare all sfs and collect all correct sfs ... i suppose some in that area is a issue in your case ...
so let me know in pm if you want try to make that experiment
dimlee
06-18-2019, 08:29 AM
I don't know if this will help but....
The server is set to:CRT=0
In the "logs.lst" file is says you got kicked for:
"Cheater was detected! Reason=4: 'Radar' "
I have never seen that before, and CRT is off. Maybe Sita can tell you what that means?
Also, just for fun if you want to try it again, I will change these settings to 0 too.
checkServerTimeSpeed=1
checkServerClientSpeed=1
I will set those to = zero. It is odd that CRT seems to be working, even when it is turned off..
The IP is :
76.102.133.254:21088
I just tried again to join. The same error message as before.
It's funny that server "blacklists" me for... using some "radar"? Wow, now I just need to find that magic button to enable my iron man suit. :eek:
Dusty88
06-18-2019, 11:42 AM
It said the same thing this time too. Not much else to try on my end... Good luck, I hope you find the problem..
stovak
06-18-2019, 03:13 PM
Dusty, I can't join your server either. I can join AleXserver on Hyperlobby no problem but when I try a direct connection to your IP, my game freezes and I have to exit with taskmanager. It does appear to connect at first but then it locks up when the mission is transferring. It's the same whether CRT is 2 or 0.
It might be a problem at my end rather than yours, I have no idea.
Dusty88
06-19-2019, 11:33 AM
I saw that someone was in it and got kicked, it said:
"Cheater was detected! Reason=3: 'Radar'
When dimlee tried it, he got:
"Cheater was detected! Reason=4: 'Radar'
There have been 6 people & me that got in with CRT=2 on and had no problem ..
I'm not sure what we did or didn't do that makes it work...
And how AleX server gets listed on HL I would love to know how. I can't list my 414.1 server on HL, the game search will ONLY take il2fb.exe. If I try to change the name of il2server.exe it il2fb.exe the server will not start. I guess that is one way to kill off HL if that was the idea...
I have given up on 414.1 until that gets fixed... I only put that server up for dimlee to test in.
dimlee
06-19-2019, 05:19 PM
I saw that someone was in it and got kicked, it said:
"Cheater was detected! Reason=3: 'Radar'
When dimlee tried it, he got:
"Cheater was detected! Reason=4: 'Radar'
There have been 6 people & me that got in with CRT=2 on and had no problem ..
I'm not sure what we did or didn't do that makes it work...
And how AleX server gets listed on HL I would love to know how. I can't list my 414.1 server on HL, the game search will ONLY take il2fb.exe. If I try to change the name of il2server.exe it il2fb.exe the server will not start. I guess that is one way to kill off HL if that was the idea...
I have given up on 414.1 until that gets fixed... I only put that server up for dimlee to test in.
Dusty, thanks for your efforts.
I have to give up as well. 4.13.4 downloaded from GOG and upgraded to 4.14.1... Same "time out" error on several 4.14.1 servers, Fun 4 All included.
Dusty88
06-20-2019, 06:32 AM
It sounds like they should just start all over again with 414, a bunch of people don't want their files wiped out and won't even try it. I don't know why mine worked perfectly, I never had any mod's might be why. I'm moving at the end of the month and don't have time for it now. My server will be down while I move but, it WILL be back on as soon as I can!
I hope they remember to change the file name il2server.exe to il2fb.exe on the dedicated server in the next patch. If they don't change it, then no HL to list a 414 server at... HL will NOT change their game search to hunt for il2server.exe.. And there is no way to write it in the game search.
Tolwyn
06-20-2019, 07:08 PM
I have to completely agree. They really made this a Charlie Foxtrot, if you know what I'm saying.
It sounds like they should just start all over again with 414, a bunch of people don't want their files wiped out and won't even try it. I don't know why mine worked perfectly, I never had any mod's might be why. I'm moving at the end of the month and don't have time for it now. My server will be down while I move but, it WILL be back on as soon as I can!
I hope they remember to change the file name il2server.exe to il2fb.exe on the dedicated server in the next patch. If they don't change it, then no HL to list a 414 server at... HL will NOT change their game search to hunt for il2server.exe.. And there is no way to write it in the game search.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.