IL2 and Widescreen

[3./JG51_Rudel]

Is it possible to run IL2 on a 19'' widecreen monitor and not get the black edges you normally get if you run the game in widescreen on a 4:3 monitor.

[flox]

Yes it's possible; you just need to make the correct changes to your conf.ini file. See the guide below for more info.

http://mission4today.com/index.php?name=Knowledge_Base&op=show&kid=5

[3./JG51_Rudel]

Thanks for the quick reply.

Does the game look better in widescreen.

[choctaw111]

Thanks for the quick reply.

Does the game look better in widescreen.

I think it does. You lose a little off the top and bottom to get wide screen to work in Il2 but IT IS WORTH IT!

[flox]

Don't be deceived when you first load it up. Only the actual missions themselves will be widescreen (the splash screen and menus will still be the standard 4:3 setup). Cheers!

[Bearcat]

In a word yes.... it looks great in widescreen, especially if you use Track IR What flox was talking about was this:

http://star.walagata.com/w/bearcat/24inch2.jpg

See how the initial loading screen has the black bars on either end? Once you go into the sim however you will not see those bars all you have to do is make a slight adjustment to your config file which can be found at C:\Program Files\Ubisoft\IL-2 Sturmovik 1946 go to conf and edit this portion of the file:

The first one is the old default conf file that I saved.. the second one is my current one that I use with my 24" widescreen.

[window]
width=1024
height=768
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=1
Use3Renders=0

[window]
width=1920
height=1200
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=0
FullScreen=1
DrawIfNotFocused=0
EnableResize=1
EnableClose=1
SaveAspect=0
Use3Renders=0

Below is an in the pit shot with the map & AI command windows up so you can see the difference.

I recommend that if you are planning to get a widescreen and have not yet done so that you get as a minimum a 22" widescreen.. if not a 24". You will be better off.

http://star.walagata.com/w/bearcat/24inch1.jpg

[flox]

Hey Bearcat, how did you move the map from the top to the bottom? I wasn't aware you could do that.

[Bearcat]

Putr your cursor over the map, L&R click and move it.. :wink:

Ghe thing is on a widescreen when you move it farther to the right , like past the invisible 4:3 line.. it will disappear behind it.. Your view will not warp or anything but the map will not be there.. and I dont know how you would get it back so be careful... Where it is on that screenshot is right at the right hand line... on the left that line is where the AI command & speedbar is....

[flox]

Amazing :shock: I've been playing since 2002 and I never knew about the map being movable. Just another one of those "little things" that surprise us sometimes. Thx BC!

[mondo]

Me neither, always wondered how people did that.

[Ploughman]

That stitched leather look to the map inlay, I don't have that.

Is that because my machine and GPU are c@rp?

[Jutocsa]

Omg the map has been hacked too ? :)

[fly_zo]

there is the map within the game ????

Oooooo :shock: :shock: :o

[Triad773]

That stitched leather look to the map inlay, I don't have that.

Is that because my machine and GPU are c@rp?

I think thats the only way it appears in the game. Maybe its just tucked into to corner too much?

Justa thought

[Wildcat_drvr]

I run a 20" dell ultrasharp w/s on a dell 410 XPS (e-6400, 2gigs ram, 2-160 gig raptor hd raid 0) and I love it. No black bars on side.Screen gos side to side. No cut offs at all. 8)

[GF_Mastiff]

In a word yes.... it looks great in widescreen, especially if you use Track IR What flox was talking about was this:

http://star.walagata.com/w/bearcat/24inch2.jpg

See how the initial loading screen has the black bars on either end? Once you go into the sim however you will not see those bars all you have to do is make a slight adjustment to your config file which can be found at C:\Program Files\Ubisoft\IL-2 Sturmovik 1946 go to conf and edit this portion of the file:

The first one is the old default conf file that I saved.. the second one is my current one that I use with my 24" widescreen.

[window]
width=1024
height=768
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=1
Use3Renders=0

[window]
width=1920
height=1200
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=0
FullScreen=1
DrawIfNotFocused=0
EnableResize=1
EnableClose=1
SaveAspect=0
Use3Renders=0

Below is an in the pit shot with the map & AI command windows up so you can see the difference.

I recommend that if you are planning to get a widescreen and have not yet done so that you get as a minimum a 22" widescreen.. if not a 24". You will be better off.

http://star.walagata.com/w/bearcat/24inch1.jpg

I tried it and the game would not start it would just crash.

[sdcruz]

yes, press M for MAP

Can you run 3 monitors with IL2 ? if so how ?

[fly_zo]

matrox parhelia !!!

my dream since huuuh ......